1. |
Install the jack to the edge of oil pan to support the engine.
|
2. |
Disconnect the ground cable (A).
|
3. |
Remove the engine mounting support bracket (B).
|
4. |
Remove the engine mounting bracket (A).
|
5. |
Install in the reverse order of removal.
|
1. |
Remove the roll rod bracket (A).
|
2. |
Install in the reverse order of removal.
|
1. |
Remove the air cleaner assembly.
(Refer to Intake and Exhaust System - "Air Cleaner")
|
2. |
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
|
3. |
Install the jack to the edge of transaxle.
|
4. |
Remove the transaxle mounting bracket.
|
5. |
Install in the reverse order of removal.
|
Rear Seat Belt Retractor Replacement
(4Door, 2Door)
•
When installing the belt, make sure not to damage the
retr ...
Components
...
General Information
The supplemental restraint system (SRS) is designed to supplement the
seat belt to help reduce the risk or severity of injury to the driver and passenger
by activating and deploying the drive ...