Kia Forte: Drive Belt Tensioner Removal and Installation - Timing System - Engine Mechanical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Drive Belt Tensioner Removal and Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Mechanical System / Timing System / Drive Belt Tensioner Removal and Installation

1.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
2.
Remove the alternator lower bolt (A).
3.
Remove the alternator brace (B).

Tightening torque :
21.6 ~ 32.4 N.m (2.2 ~ 3.3 kgf.m, 15.9 ~ 23.9 lb-ft)

4.
Install in the reverse order of removal.
Drive Belt Tensioner Components
1. Alternator brace 2. Adjust nut ...

Drive Belt Tensioner Inspection
Check the belt tensioner for excessive foreign substances, crack, damage or sticking of pivot shaft. Replace if necessary. ...

See also:

AGM Battery Inspection
Battery Diagnostic Flow Vehicle parasitic current inspection 1. Turn all the electric devices OFF, and then turn the ignition switch OFF. ...

Master Cylinder
Components 1. Reservoir cap 2. Reservoir 3. Grommet 4. Master cylinder ...

Component
1. Airbag module 2. Remote control assembly 3. Garnish 4. Steering wheel 5. Wiring 6. Lower cover ...

Copyright © www.kifomanual.com 2014-2024