1. |
Remove the crankshaft damper pulley.
(Refer to Timing System - "Crankshaft Damper Pulley")
|
2. |
Remove the front oil seal (A).
|
3. |
Apply engine oil on the edge of new oil seal.
|
4. |
Using the SST (09231-2E000), install a front oil seal (A).
|
5. |
Install the crankshaft damper pulley.
(Refer to Timing System - "Crankshaft Damper Pulley")
|
Components
(4Door, 5Door)
1. Rear door inside handle cap
2. Rear door pull handle cap
3. Rear door trim
4. Rear door rear seal
5. Rear door panel
6. Rear door module
7. ...
Specifications
Transaxle type
M6CF3-1
Engine type
Gasoline 1.8 MPI / Gasoline 2.0 GDI
4/5DR
2DR
Gear ratio
1st
3.308
3.615
...
Cooling Fan Components
1. Cooling fan
2. Fan motor
3. Cooling fan shroud
4. Resister
...