|
Mark all wiring and hoses to avoid misconnection.
|
1. |
Remove the engine cover.
|
2. |
Disconnect the battery negative terminal.
|
3. |
Disconnect the wiring connectors and harness clamps, and then
remove the wiring and protectors from the cylinder head and the intake
manifold.
|
4. |
Disconnect the positive crankcase ventilation (PCV) hose (A).
|
5. |
Disconnect the breather hose (A).
|
6. |
Remove the ignition coils.
(Refer to Engine Electrical System - “Ignition Coil”)
|
7. |
Remove the engine oil level gauge.
(Refer to Lubrication System - “Oil Level Gauge & Pipe”)
|
8. |
Remove the cylinder head cover (A).
|
Smart Key
Smart Key Code Saving
1.
Connect the DLC cable of GDS to the data link connector in driver
side crash pad lower panel, turn the power on GDS.
...
Engine compartment
1. Engine oil filler cap
2. Engine oil dipstick
3. Brake/clutch fluid reservoir
4. Air cleaner
5. Fuse box
6. Positive battery terminal
7. Negative battery terminal
8. Windshiel ...
Starter Removal
1.
Disconnect the battery negative (-) cable.
2.
Remove the air duct and air cleaner assembly.
(Refer to Engine Mechanical System - &qu ...