|
|
1. |
Remove the cylinder head cover.
(Refer to Cylinder Head Assembly - “Cylinder Head Cover”)
|
2. |
Set No.1 cylinder to TDC (Top dead center) on compression stroke.
|
3. |
Remove the crankshaft damper pulley.
(Refer to Timing System - “Crankshaft Damper Pulley”)
|
4. |
Remove the service plug bolt (A) with the gasket (B).
|
5. |
Remove the tensioner arm bolt (A).
|
6. |
Push down the tensioner arm (A).
|
7. |
Remove the camshaft bearing caps.
|
8. |
Remove the exhaust camshaft (A) first, then intake camshaft (B).
|
9. |
Remove the tensioner arm (A).
|
10. |
Remove the CVVT assembly (A) from the camshaft.
|
Component Replacement After Deployment
Before doing any SRS repairs, use the GDS Pro to check for DTCs.
Refer to the Diagnostic Trouble Code list for repairing ...
Trunk Lid Trim Replacement
(4Door, 2Door)
•
Put on gloves to protect your hands.
...
Front Seat Assembly Replacement
•
When removing or installing the front passenger seat,
be sure to initialize the Weight ...