1. |
Remove the automatic transaxle.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
|
2. |
Remove the drive plate (A) and the adapter plate (B).
|
3. |
Install in the reverse order of removal.
|
Line Pressure Control Solenoid Valve Specifications
Direct control VFS[Line Pressure]
▷ Control type : Normal high type
Control Pressure kpa (kgf/cm², psi)
500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42)
Current val ...
Headlamp welcome
When the headlight(light switch in the headlight or AUTO position) is on and
all doors (and trunk/tailgate) are locked and closed, the headlight, position light
and tail light will come on for 1 ...
Crankshaft Components
1. Crankshaft upper bearing
2. Crankshaft thrust bearing
3. Crankshaft
4. Crankshaft lower bearing
5. Crankshaft position sensor (CKPS) wheel
6. Lower crankcase
7. Gas ...