1. |
Assemble the other parts in the reverse order of disassembly.
|
In case the cylinder block is replaced with a new one, select
the proper crankshaft main bearing and the piston according to the crankshaft
journal bore mark and the cylinder bore mark on the cylinder block.
|
Purge Control Solenoid Valve (PCSV) Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the purge control solenoid valve connector (A) ...
Cluster Fascia Panel Component Location
1. Cluster fascia panel
...
Under Body
Projected Dimensions
* These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ]
Actual-Measurement Dimensions
...