Kia Forte: Cooling Fan Description
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Mechanical System / Cooling System / Cooling Fan Description
[Air conditioning type]
The cooling fan operates in 2 stages (HIGH/LOW). The engine control module
(ECM) controls the cooling fan according to the coolant temperature, vehicle
speed and A/C operation.
[Cooling fan operation conditions]
| A/C switch |
A/C pressure [kgf/cm² G (psi G)] |
Vehicle speed [km/h (mph)] |
Coolant temperature [°C (°F)] |
Cooling fan speed |
| OFF |
ㅡ |
V < 45 (28) |
100 ~ 105 (212 ~ 221) |
LOW |
| 105 (221) or above |
HIGH |
|||
| 45 (28) ≤ V < 80 (49.7) |
100 ~ 105 (212 ~ 221) |
LOW |
||
| 105 (221) or above |
HIGH |
|||
| 80 (49.7) ≤ V |
105 (221) or above |
HIGH |
||
| ON |
P < 6 (85.3) |
All |
105 (221) or above |
HIGH |
| 6 (85.3) ≤ P < 12 (170.7) |
V < 45 (28) |
60 ~ 100 (140 ~ 212) |
LOW |
|
| 100 (212) or above |
HIGH |
|||
| 45 (28) ≤ V < 80 (49.7) |
95 ~ 100 (203 ~ 212) |
LOW |
||
| 100 (212) or above |
HIGH |
|||
| 80 (49.7) ≤ V |
105 (221) or above |
HIGH |
||
| 12 (170.7) ≤ P < 15.5 (120.5) |
V < 45 (28) |
-30 ~ 95 (-22 ~ 203) |
LOW |
|
| 95 (203) or above |
HIGH |
|||
| 45 (28) ≤ V < 80 (49.7) |
95 ~ 100 (203 ~ 212) |
LOW |
||
| 100 (212) or above |
HIGH |
|||
| 80 (49.7) ≤ V |
105 (221) or above |
HIGH |
||
| 15.5 (120.5) ≤ P |
All |
-30 (-22) or above |
HIGH |
[Non-Air conditioning type]
The cooling fan operates in 1 stages (HIGH). The engine control module
(ECM) controls the cooling fan according to the coolant temperature, vehicle
speed and A/C operation.
[Cooling fan operation conditions]
| A/C switch |
A/C pressure [kgf/cm² G (psi G)] |
Vehicle speed [km/h (mph)] |
Coolant temperature [°C (°F)] |
Cooling fan speed |
| OFF |
ㅡ |
V < 45 (28) |
100 ~ 105 (212 ~ 221) or above |
HIGH |
| 45 (28) ≤ V < 80 (49.7) |
100 ~ 105 (212 ~ 221) or above |
HIGH |
||
| 80 (49.7) ≤ V |
105 (221) or above |
HIGH |
Cooling Fan Components
1. Cooling fan
2. Fan motor
3. Cooling fan shroud
4. Resister
...
Cooling Fan Specifications
Item
Specification
Fan type
PULLER
Fan speed control
Resistor (HI-LOW-OFF)
Air flow rate [㎥/h (yd³/h)]
1,700 (2,22 ...
See also:
Measurement Method
Projected Dimensions
1.
These are the dimensions measured when the measurement points
are projected into the reference plane, and are the reference dimensions ...
Component Location
1. Auto light sensor
2. Head lamps
3. Lighting switch (Auto)
4. Tail lamps
5. Body control module (BCM)
...
Teaching Procedures
1.
Key Teaching Procedure
Key teaching must be done after replacing a defective ECM or when
providing additional keys to the vehicle owner.
The procedure st ...
Copyright © www.kifomanual.com 2014-2024