1. |
Disconnect the battery "-" terminal.
|
2. |
Remove the air duct and air cleaner assembly.
(Refer to Intake And Exhaust System - "Air Cleaner)
|
3. |
Disconnect the over flow hose (A) from the filler neck.
|
4. |
Loosen the filler neck assembly mounting bolts (A).
|
5. |
Disconnect the fan motor connector (A).
|
6. |
Loosen the variable Intake solenoid (VIS) actuator mounting bolts
(A).
|
7. |
Detach the variable intake solenoid (VIS) valve & bracket after
unfastening the mounting bolt (A).
|
8. |
Disconnect the crankshaft position sensor (CKPS) connector (A)
and the front connector (B).
|
9. |
Remove the cooling fan (A).
|
1. |
Disconnect the wire harness connector (A) and the fan motor connector
(B).
|
2. |
Remove the resistor (A) from the cooling fan shroud.
|
3. |
Install in the reverse order of removal.
|
Starter Description
The starting system includes the battery, starter, solenoid switch, ignition
switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch,
connection wires and the battery ...
Specifications
Items
Specification
Hood
Type
Rear hinged, Front opening type, stay type
Front Door
Construction
Front hinged, frame door constructi ...
High Mounted Stop Lamp Installation
[2 Door]
1.
Install the high mounted stop lamp assembly.
2.
Install the roof trim assembly.
[4 Door]
1.
...