Kia Forte: Cooling Fan Disassembly
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Mechanical System / Cooling System / Cooling Fan Disassembly
| 1. |
Remove the cooling fan (A) from the cooling fan assembly.
|
| 2. |
Disconnect the fan motor connector (A) from the resistor.
|
| 3. |
Loosen the screws and then remove the fan motor (A) from the cooling
fan shroud.
|
| 4. |
Assemble in the reverse order of disassembly.
|
Cooling Fan Removal and Installation
Cooling fan assembly
1.
Disconnect the battery "-" terminal.
2.
Remove the air duct and air cleaner assembly.
(Refer to ...
Cooling Fan Inspection
Fan Motor
1.
Disconnect the fan motor connector from the resistor.
2.
Connect the battery voltage to the "+" terminal and ...
See also:
Instrument Cluster Circuit Diagram
...
Variable Charge Motion Actuator (VCMA) Installation
•
Install the component with the specified torques.
•
...
Rear Wheel House Trim Replacement
(4Door)
•
Put on gloves to protect your hands.
...
Copyright © www.kifomanual.com 2014-2024