Fan Motor |
1. |
Disconnect the fan motor connector from the resistor.
|
2. |
Connect the battery voltage to the "+" terminal and ground to
"-" terminal.
|
3. |
Check the cooling fan motor operates well.
|
Components
1. Reverse hose
2. Master cylinder
3. Ignition lock switch
4. Clutch switch
5. Clutch arm assembly
6. Pedal pad
...
Water Temperature Control Assembly Removal and Installation
1.
Remove the engine cover.
2.
Drain the engine coolant.
(Refer to Cooling System - "Coolant")
3.
...
Under Body
Projected Dimensions
* These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ]
Actual-Measurement Dimensions
...