1. |
Remove the engine cover.
|
2. |
Drain the engine coolant.
(Refer to Cooling System - "Coolant")
|
3. |
Remove the air cleaner assembly.
(Refer to Intake And Exhaust System - “Air Cleaner”)
|
4. |
Disconnect the radiator upper hose.
(Refer to Cooling System - “Radiator”)
|
5. |
Disconnect the heater hose.
(Refer to Engine And Transmission Assembly - "Engine And Transmission
Assembly")
|
6. |
Disconnect the bypass hose (A) and the throttle body coolant hose
(B) (if equipped).
|
7. |
Remove the water temperature control assembly (A) with the O-ring
(B).
|
8. |
Install in the reverse order of removal.
|
9. |
Fill the engine coolant.
(Refer to Cooling System - "Coolant")
|
10. |
Start engine and check for leaks.
|
Tightening Torques
Items
N.m
kgf.m
lb-ft
Oil drain plug
58.9 ~ 78.5
6.0 ~ 8.0
43.4 ~ 57.8
Oil filler plug
58.9 ~ 78.5
6.0 ~ 8.0
...
Telemetics Unit (TMU) Installation
1.
Install the MTS unit after connecting the cable and connector.
2.
Install the glove box housing.
3.
Connect ...
Troubleshooting
Symptom
Possible cause
Remedy
Tachometer does not operate
Cluster fuse (10A) blown
Check for short and replace fuse
CAN line faulty
...