1. |
Loosen the drain plug, and then drain the engine coolant. Remove
the radiator cap to help drain the coolant faster.
|
2. |
Remove the drive belt.
(Refer to Timing System – “Drive Belt”)
|
3. |
Remove the water pump pulley (A).
|
4. |
Remove the water pump assembly (A) with the gasket (B).
|
5. |
Install in the reverse order of removal.
|
6. |
Fill the engine coolant.
|
7. |
Start the engine and check for leaks.
|
8. |
Recheck the coolant level.
|
Front Door Trim Replacement
(4Door, 5Door)
•
Put on gloves to protect your hands.
...
Cruise Control Switch Inspection
[Measuring Resistance]
1.
Check for resistance between terminals in each switch position.
Function
switch
Connector
termi ...
Valve Body Description
The valve body is essential to automatic transaxle control and consists
of various valves used to control the oil feed from the oil pump. Specifically,
these valves consist of pressure regula ...