Kia Forte: Thermostat Inspection - Cooling System - Engine Mechanical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Thermostat Inspection

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Mechanical System / Cooling System / Thermostat Inspection

1.
Immerse the thermostat in water and gradually heat the water.

2.
Check the valve opening temperature.
If the valve opening temperature is not as specified, replace the thermostat.

Valve opening temperature:
88 ± 1.5°C (190.4 ± 34.7°F)
Full opening temperature: 100°C (212°F)

3.
Check the valve lift.
If the valve lift is not as specified, replace the thermostat.

Valve lift : 8 mm (0.3 in.) or more at 100°C (212°F)

Thermostat Removal and Installation
   Disassembly of the thermostat would have an adverse effect, causing a lowering of cooling efficiency. Do not remove the ...

Thermostat Troubleshooting
Symptoms Possible Causes Remedy Coolant leakage • From the thermostat gasket Check the mounting nu ...

See also:

Height Adjust Component Location
(4Door, 5Door) 1. Height adjust ...

Blower Unit Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the heater and blower assembly. (Refer to Heater - "Heater Unit") ...

Rear Combination Lamp Removal
Rear Combination Lamp (Outside) 1. Disconnect the negative (-) battery terminal. 2. Remove the rear combination lamp cover (A). ...

Copyright © www.kifomanual.com 2014-2024