Kia Forte: Oil Pump Removal and Installation
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Mechanical System / Lubrication System / Oil Pump Removal and Installation
| 1. |
Remove the timing chain cover.
(Refer to Timing System – “Timing Chain Cover”)
|
| 2. |
Remove the oil pump cover (A).
|
| 3. |
Remove the inner rotor (A) and outer rotor (B).
|
| 4. |
Install in the reverse order of removal.
|
Oil Pump Components
1. Inner roter
2. Outer roter
3. Oil pump cover
4. Relief plunger
5. Relief spring
6. Relief plug
7. O-ring (suction side)
8. O-ring (discharge side)
...
Oil Pump Inspection
1.
Remove the relief plunger.
Remove the plug (A), spring (B) and relief plunger (C).
Tightening torque
Plug (A) :
...
See also:
Fuel Filler Cap Description
A ratchet tightening device on the threaded fuel filler cap reduces the
chances of incorrect installation, which seals the fuel filler. After the gasket
on the fuel filler cap and the filler ...
Operation
1.
General Function
A.
Auto-learn takes place only once per Ignition cycle.
B.
On successful compl ...
Filter replacement
It must be replaced when necessary, and should not be washed.
You can clean the filter when inspecting the air cleaner element.
Clean the filter by using compressed air.
1. Loosen the air c ...
Copyright © www.kifomanual.com 2014-2024