1. |
Remove the engine cover.
|
2. |
Disconnect the battery negative terminal.
|
3. |
Disconnect the front and rear oxygen sensor connectors (A) and
then remove them from the bracket.
|
4. |
Remove the front muffler.
(Refer to Intake And Exhaust System - "Muffler")
|
5. |
Remove the front oxygen sensror (A).
(Refer to Engine Control/Fuel System - "Heated Oxygen Sensor (HO2S)")
|
6. |
Remove the exhaust manifold heat protector (B).
|
7. |
Remove the driveshaft heat protector (A).
|
8. |
Remove the exhaust manifold stay (A).
|
9. |
Remove the exhaust manifold (A) with the gasket (B).
|
10. |
Install in the reverse order of removal.
|
On-vehicle Inspection
Inspect ignition coil assembly and
Perform spark test
1.
Check for DTCs.
...
Inspection
1.
Check the bushing for wear.
2.
Check the brake pedal for bending or twisting.
3.
Check the brake pedal retur ...
DC/DC Converter Circuit Diagram
In the ISG mode, if the power of an audio system turnsOFF by drawdown
while “Auto Starting” or “Idle Starting”functi ...