1. |
Detach the rubber hanger (A) from the front muffler.
|
2. |
Remove the front muffler (B).
|
3. |
Install in the revers order of removal.
|
1. |
Detach the rubber hanger (A) from the center muffler.
|
2. |
Remove the catalytic converter and the center muffler (B).
|
3. |
Install in the revers order of removal.
|
1. |
Detach the rubber hanger (A) from the main muffler.
|
2. |
Remove the main muffler (B).
|
3. |
Install in the reverse order of removal.
|
1. |
Check that the clamping part of the center muffler assembly is
damaged or deformed.
If the muffler is too corroded to clamp, replace the center muffler
assembly.
|
2. |
Record the gap (A, B, C, D, E, F) between the tail pipe (or tail
trim) and the rear bumper.
[Pipe type]
[Trim type]
[Bumper-integrated trim type]
|
3. |
Remove the catalytic converter & center muffler (A).
|
4. |
Cut the center muffler as the instruction below.
[With dent]
[Without dent]
[A/S muffler]
|
5. |
Install the center muffler.
|
Front Door Trim Component Location
(4Door, 5Door)
1. Front door trim
(2Door)
1. Front door trim
...
Cooling Fan Specifications
Item
Specification
Fan type
PULLER
Fan speed control
Resistor (HI-LOW-OFF)
Air flow rate [㎥/h (yd³/h)]
1,700 (2,22 ...
DC/DC Converter Circuit Diagram
In the ISG mode, if the power of an audio system turnsOFF by drawdown
while “Auto Starting” or “Idle Starting”functi ...