[On vehicle inspection] |
1. |
Accelerate the engine to about 3,000 rpm 3 times or more.
|
2. |
Remove the spark plug.
|
3. |
Check the spark plug visually.
If the electrode is dry, the spark plug is normal.
If the electrode is wet, check the damage and electrode gap as
below.
|
[Component Inspection] |
1. |
Check the spark plug for any damage on its thread and insulator.
If there is damage, replace the spark plug.
|
2. |
Check the electrode. Measure the insulation resistance with an
ohmmeter.
If the resistance is less than the specified value, adjust the
electrode gap.
|
3. |
Check the spark plug electrode gap.
If the gap is greater than the maximum, replace the spark plug.
|
Rear Body
* These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ]
Side outer p ...
Maintenance under severe usage conditions
The following items must be serviced more frequently on cars normally used under
severe driving conditions. Refer to the chart below for the appropriate maintenance
intervals.
R : Replace
I : Ins ...
Special Service Tools
Tool (Number and Name)
Illustration
Application
Fuel Pressure Gauge
(09353-24100)
Measuring the fuel line pressure
Fuel Pressur ...