Kia Forte: Description
The charging system included a battery, an alternator with a built-in
regulator, and the charging indicator light and wire.
The Alternator has eight built-in diodes, each rectifying AC current to
DC current.
Therefore, DC current appears at alternator "B" terminal.
In addition, the charging voltage of this alternator is regulated by the
battery voltage detection system.
The alternator is regulated by the battery voltage detection system. The
main components of the alternator are the rotor, stator, rectifier, capacitor
brushes, bearings and V-ribbed belt pulley. The brush holder contains a built-in
electronic voltage regulator.
Alternator Management System |
Alternator management system controls the charging voltage set point in
order to improve fuel economy, manage alternator load under various operating
conditions, keep the battery charged, and protect the battery from over-charging.
ECM controls generating voltage by duty cycle (charging control, discharging
control, normal control) based on the battery conditions and vehicle operating
conditions.
The system conducts discharging control when accelerating a vehicle. Vehicle
reduces an alternator load and consumes an electric power form a battery.
The system conducts charging control when decelerating a vehicle. Vehicle
increases an alternator load and charges a battery.
•
First of all, check for DTCs. If a DTC is present, perform
troubleshooting in accordan ...
See also:
Head Lamps Component
1. Head lamp assembly lens & housing
2. Head lamp (High) lamp
3. Dust cap (High)
4. Head lamp (Low) lamp
5. Dust cap (Low)
6. Turn signal lamp socket
7. Turn signa ...
Replacement
•
Put on gloves to protect your hands.
&n ...
Power Window Motor Inspection
Front Power Window Motor Inspection
1.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
2.
Disconnect the c ...