Kia Forte: Alternator Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Electrical System / Charging System / Alternator Removal
| 1. |
Disconnect the battery negative terminal.
|
| 2. |
Remove the drive belt.
(Refer to Engine Mechanical System - "Drive Belt")
|
| 3. |
Disconnect the alternator connector (A) and the cable (B) from
alternator "B" terminal.
|
| 4. |
Pull out the through bolt and then remove the alternator (A).
|
Alternator Circuit Diagram
•
COM signal - When
controlling the voltage generated, the ECM sends the target
...
Alternator Installation
1.
Install in the reverse order of removal.
2.
Adjust the alternator belt tension after installation.
(Refer to Engine Mechanical ...
See also:
Manifold Absolute Pressure Sensor (MAPS) Specification
Pressure [kPa (kgf/cm², psi)]
Output Voltage (V)
20.0 (0.20, 2.9)
0.79
46.7 (0.47, 6.77)
1.84
101.3 (1.03, 14.7)
4.0
...
Camshaft Position Sensor (CMPS) Description
Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft
position by using a hall element.
It is related with Crankshaft Position Sensor (CKPS) and detects the piston
pos ...
Copyright © www.kifomanual.com 2014-2024