Kia Forte: Alternator Disassembly
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Electrical System / Charging System / Alternator Disassembly
| 1. |
Remove the rear cover (A) after removing nuts (B).
|
| 2. |
Remove the mounting bolts (A) and the regulator assembly (B).
|
| 3. |
Remove the slip ring guide (A) after pulling it.
|
| 4. |
Remove the OAD(Overrunning Alternator Decoupler) cap.
|
| 5. |
Remove the OAD(Overrunning Alternator Decoupler) pulley (A) using
the special tool.
|
| 6. |
Unsolder the 3 stator leads (A).
|
| 7. |
Remove the 4 through bolts (A).
|
| 8. |
Disconnect the rotor (A) and housing (B).
|
Alternator Installation
1.
Install in the reverse order of removal.
2.
Adjust the alternator belt tension after installation.
(Refer to Engine Mechanical ...
Alternator Reassembly
1.
Reassemble in the reverse order of disassembly.
•
...
See also:
Center Fascia Panel Component Location
1. Center fascia panel
...
Phone
Before using the Bluetooth® Wireless Technology phone features
In order to use Bluetooth® Wireless Technology phone, you must first pair
and connect the Bluetooth® Wireless Technology mobile pho ...
IMS Power Seat Control Inspection
1.
Disconnect the IMS control switch connector.
2.
With the power IMS control switch in each position, make sure
that continuity ex ...
Copyright © www.kifomanual.com 2014-2024