Kia Forte: Battery Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Electrical System / Charging System / Battery Removal
| 1. |
Disconnect the battery terminals (A).
|
| 2. |
Remove the air duct and air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
|
| 3. |
Remove the battery insulation pad.
|
| 4. |
Remove the battery (A) after removing the mounting bracket.
|
| 5. |
Remove the ECM.
(Refer to Engine Control/Fuel System - “Engine Control Module
(ECM)”)
|
| 6. |
Remove the battery tray (A) after removing the bolts.
|
Battery Adjustment
Battery charging
In general, vehicle battery charging system has three forms.
1.
Constant current charge: The battery voltage gradually rises by
charging w ...
Battery Installation
1.
Install in the reverse order of removal.
Battery (-)terminal installation:
4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft)
...
See also:
Hood Assembly Replacement
•
Be careful not to damage the hood and body.
...
Function
Function
Description
Input
Output
Front Washer & Wiper
-
IGN2 On & WasherS/W On and Off
...
Water pump Inspection
1.
Check each part for cracks, damage or wear, and replace the coolant
pump assembly if necessary.
2.
Check the bearing for damage, abnorm ...
Copyright © www.kifomanual.com 2014-2024