1. |
Disconnect the M-terminal (A) on the magnet switch assembly.
|
2. |
After loosening the screws (A), detach the magnet switch ssembly
(B).
|
3. |
Loosen the through bolts (A).
|
4. |
Remove the brush holder assembly (A), armature assembly (B) and
yoke assembly (C).
|
5. |
Remove the gasket sheet (A) and lever stop (B).
|
6. |
Remove the reducer assembly (A) and lever (B).
|
7. |
Press the stopper (A) using a socket (B).
|
8. |
After removing the stop ring (A) using stop ring pliers (B).
|
9. |
Disconnect the stopper (A), overrunning clutch (B) and internal
gear (C).
|
10. |
Reassembly is the reverse of disassembly.
|
Exterior overview
1. Hood
2. Head lamp
3. Fog lamp
4. Wheel and tire
5. Outside rearview mirror
6. Front windshield wiper blades
7. Windows
8. Parking assist system
9. Front removable towing hook
10. D ...
Heater & A/C Control Unit (DATC) Replacement
1.
Remove the audio unit.
(Refer to Body Electrical System - "Audio Unit")
2.
After loosening the mounting screws, remove the ...