1. |
Disconnect the battery negative terminal.
|
2. |
Remove the fuse box cover.
|
3. |
Remove the starter relay (A).
|
4. |
Using an ohmmeter, check that there is continuity between each
terminal.
|
5. |
Apply 12V to terminal 85 and ground to terminal 86.
Check for continuity between terminals 30 and 87.
|
6. |
If there is no continuity, replace the starter relay.
|
7. |
Install the starter relay.
|
8. |
Install the fuse box cover.
|
Transaxle Control Module (TCM) Installation
1.
Installation is reverse of removal.
•
...
Camshaft Position Sensor (CMPS) Circuit Diagram
(M/T)
(A/T)
...
Description
•
Component location : Clutch
switch is connected to top of the clutch pedal assembly.
•
Function
1.
Clutch ...