Kia Forte: Cruise Control Switch Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Electrical System / Cruise Control System / Cruise Control Switch Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the driver airbag module.
(Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring")
|
| 3. |
Remove the steering wheel.
(Refer to Steering System - "Steering Column and Shaft")
|
| 4. |
Remove the steering wheel cover (A) after loosening the screw.
|
| 5. |
Disconnect the steering heater connectors (A).
|
| 6. |
Remove the steering remote control switch assembly after loosening
the mounting screws (4EA).
|
| 7. |
Disconnect the switch connectors (A).
|
| 8. |
Remove the cruise control switch (A) after loosening the mounting
screws.
|
Cruise Control Switch Inspection
[Measuring Resistance]
1.
Check for resistance between terminals in each switch position.
Function
switch
Connector
termi ...
Cruise Control Switch Installation
1.
Reassemble the cruise control switch after connecting the connector.
2.
Reassemble the driver airbag module.
...
See also:
Oil Pressure Switch Removal and Installation
1.
Disconnect the oil pressure switch connector (A) and then remove
the oil pressure switch (B).
Tightening torque :
9.8 ~ 11.8N.m (1 ...
Front Body
Front Body A
* These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ]
Front Body B
* These dimensions indicated in th ...
Rear Transverse Trim Replacement
(5Door)
•
Put on gloves to protect your hands.
...
Copyright © www.kifomanual.com 2014-2024