Kia Forte: Specifications
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Emission Control System / Specifications
Purge Control Solenoid Valve (PCSV)
▷ Specification
| Item |
Specification |
| Coil Resistance (Ω) |
22.0 ~ 26.0 [20°C(68°F)] |
Fuel Tank Pressure Sensor (FTPS)
▷ Type: Piezo-Resistive Pressure Sensor
▷ Specification
| Pressure [kPa (kgf/cm², in H2O)] |
Output Voltage (V) |
| -6.67 (-0.068, -26.8) |
0.5 |
| 0 |
2.5 |
| +6.67 (0.068, 26.8) |
4.5 |
Canister Close Valve (CCV)
▷ Specification
| Item |
Specification |
| Coil Resistance (Ω) |
19.5 ~ 22.5 [20°C(68°F)] |
Tightening Torques
Item
kgf.m
N.m
lb-ft
Positive crankcase ventilation valve installation
0.2 ~ 0.3
1.96 ~ 2.94
1.45 ~ 2.17
Canister install ...
See also:
Fuel Line Removal
1.
Release the residual pressure in fuel line.
(Refer to the Fuel Delivery System - Repair Procedures - "Release
Residual Pressure in Fuel Line".)
...
Battery saver function
The purpose of this feature is to prevent the battery from being discharged.
The system automatically turns off the parking lights when the driver removes
the ignition key and opens the driver- ...
Smart Key Unit Installation
Smart Key Unit
1.
Install the smart key unit and RF receiver.
2.
Connect the connector and install the smart key unit.
...
Copyright © www.kifomanual.com 2014-2024