Kia Forte: On-board Refueling Vapor Recovery (ORVR) valve Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Emission Control System / Evaporative Emission Control System / On-board Refueling Vapor Recovery (ORVR) valve Removal
| 1. |
Turn the ignition switch OFF, and then remove battery (-) cable.
|
| 2. |
Remove the fuel pump.
(Refer to Fuel System - "Fuel Pump")
|
| 3. |
Remove the ORVR (A) after releasing hooks (B).
|
Canister Installation
1.
Installation is the reverse of removal.
Canister installation bolt/nut:
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft)
...
On-board Refueling Vapor Recovery (ORVR) valve Installation
1.
Installation is the reverse of removal.
...
See also:
Air Cleaner Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative terminal.
3.
Remove the air duct (A).
...
Replacement
•
Put on gloves to protect your hands.
&n ...
Front Seat Shield Outer Cover Component Location
1. Front seat shield outer cover
...
Copyright © www.kifomanual.com 2014-2024