Kia Forte: ETC (Electronic Throttle Control) System Fail-Safe Mode
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Engine Control System / ETC (Electronic Throttle Control) System Fail-Safe Mode
| Item |
Fail-Safe |
|
| ETC Motor |
Throttle valve stuck at 7° |
|
| TPS |
TPS 1 fault |
Replace it with TPS 2 |
| TPS 2 fault |
Replace it with TPS 1 |
|
| TPS 1,2 fault |
Throttle valve stuck at 7° |
|
| APS |
APS 1 fault |
Replace it with APS 2 |
| APS 2 fault |
Replace it with APS 1 |
|
| APS 1,2 fault |
Engine idle state |
|
When throttle value is stuck at 7°, engine speed is limited at
below 1,500rpm and vehicle speed at maximum 40 ~ 50 km/h (25 ~ 31 mph)
|
ETC (Electronic Throttle Control) System Specification
Throttle angle (°)
Output voltage (V) [Vref = 5.0V]
TPS1
TPS2
0
0.5
4.5
10
0.96
4.05
20
1.41 ...
See also:
Start/Stop Button Installation
1.
Install the start/stop button.
2.
Connect the start/stop button connector.
3.
Install the cluster fascia pan ...
Line Pressure Control Solenoid Valve Circuit Diagram
...
Crankshaft Position Sensor (CKPS) Description
Crankshaft Position Sensor (CKPS) detects the crankshaft position and
is one of the most important sensors of the engine control system. If there
is no CKPS signal input, the engine may stop ...
Copyright © www.kifomanual.com 2014-2024