Kia Forte: Knock Sensor (KS) Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Engine Control System / Knock Sensor (KS) Removal
| 1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
| 2. |
Disconnect the knock sensor connector (A).
|
| 3. |
Remove the intake manifold (Refer to “Intake And Exhaust System”
in EM group).
|
| 4. |
Remove the installation bolt (A), and then remove the sensor from
the cylinder block.
|
Knock Sensor (KS) Circuit Diagram
(M/T)
(A/T)
...
Knock Sensor (KS) Installation
•
Install the component with the specified torques.
•
...
See also:
1. TCM Connector and Terminal Function
...
Smart key precautions
If you lose your smart key, you will not be able to start the engine.
Tow the vehicle, if necessary, and contact an authorized Kia dealer.
A maximum of 2 smart keys can be registered to a singl ...
Heated Oxygen Sensor (HO2S) Installation
•
Install the component with the specified torques.
•
...
Copyright © www.kifomanual.com 2014-2024