Kia Forte: Heated Oxygen Sensor (HO2S) Inspection
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Engine Control System / Heated Oxygen Sensor (HO2S) Inspection
| 1. |
Turn the ignition switch OFF.
|
| 2. |
Disconnect the HO2S connector.
|
| 3. |
Measure resistance between the HO2S terminals 2 and 5 [B1/S1].
Measure resistance between the HO2S terminals 3 and 4 [B1/S2].
|
| 4. |
Check that the resistance is within the specification.
|
Heated Oxygen Sensor (HO2S) Circuit Diagram
(M/T)
(A/T)
...
Heated Oxygen Sensor (HO2S) Removal
[SULEV]
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the connector (A), and th ...
See also:
Tire Removal
1.
Remove valve core and deflate the tire.
2.
Remove the side of the tire bead area from the wheel using tire
changing machine .
...
Exhaust Manifold Components
1. Heat protector
2. Exhaust manifold gasket
3. Exhaust manifold
4. Exhaust manifold stay
...
Components
1. Control shaft complete
2. Back-up lamp switch
3. Vehicle speed sensor
4. Transaxle housing
5. Transaxle case
...
Copyright © www.kifomanual.com 2014-2024