Kia Forte: Accelerator Position Sensor (APS) Circuit Diagram

Accelerator Position Sensor (APS) Specification

Accelerator Position Output Voltage (V) APS1 APS2 C.T 0.7 ~ 0.8 0.29 ~ 0.46 W.O.T 3.85 ~ 4.35 1.93 ~ 2.18 ...

Accelerator Position Sensor (APS) Inspection

1. Connect the GDS on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the output volt ...

See also:

Seat Belt Switch Installation
1. Install in the reverse of removal. ...

Oil Level Gauge & Pipe Removal and Installation
1. Remove the oil level gauge (A). 2. Install in the reverse order of removal. ...

ETC (Electronic Throttle Control) System Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the resonator and the air intake hose (Refer to “I ...