Kia Forte: Accelerator Position Sensor (APS) Inspection
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Engine Control System / Accelerator Position Sensor (APS) Inspection
| 1. |
Connect the GDS on the Data Link Connector (DLC).
|
| 2. |
Turn the ignition switch ON.
|
| 3. |
Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.
|
Accelerator Position Sensor (APS) Circuit Diagram
(M/T)
(A/T)
...
Accelerator Position Sensor (APS) Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Disconnect the accelerator position sensor connector (A). ...
See also:
Heater & A/C Control Unit (Manual) Components
Connector Pin Function
Connector
No.
Description
Connector
No.
Description
A
1
Ground
B
14
In ...
Front Hub / Knuckle Components
1. Drive shaft coking nut
2. Brake disc
3. Wheel hub assembly
4. Wheel bearing
5. Snap ring
6. Dust cover
7. Knuckle
8. Drive shaft
...
Auto Defogging Actuator Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box housing.
(Refer to Body -"Glove Box Housing")
...
Copyright © www.kifomanual.com 2014-2024