(M/T) |
(A/T) |
Overhead Console Lamp Inspection
1.
Remove the overhead console lamp assembly then check for continuity
between terminals. If the continuity is not as specified, replace the
map lamp switch.
...
Accelerator Position Sensor (APS) Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Disconnect the accelerator position sensor connector (A). ...
Timing Chain Cover Installation
1.
Install the timing chain cover.
(1)
Using a gasket scraper, remove all the old packing material
from the gasket surfaces.
...