1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
2. |
Release the residual pressure in fuel line (Refer to the Fuel
Delivery System - Repair Procedures - "Release Residual Pressure in
Fuel Line").
|
3. |
Disconnect the injector connector (A).
|
4. |
Disconnect the fuel feed tube quick-connector (B).
|
5. |
Remove the installation bolt (C), and then remove the delivery
pipe & injector assembly from the engine.
|
6. |
Remove the fixing clip (A), and then separate the injector from
the delivery pipe.
|
Multimedia Jack Circuit Diagram
...
Component Location
1. Horn switch
2. Horn relay (Engine room compartment)
3. Clock spring
4. Horn
...
Installation
1.
Install in the reverse order of removal.
2.
After installation, bleed the brake system.
(Refer to Brake system bleeding)
...