Kia Forte: Purge Control Solenoid Valve (PCSV) Description

Purge Control Solenoid Valve (PCSV) is installed on the intake manifold and controls the evaporative purge between the canister and the intake manifold. It is a normally closed solenoid valve and is open when the ECM grounds the valve control line. When the passage is open (PCSV ON), fuel vapor stored in the canister is transferred to the intake manifold.

Injector Installation

   • Install the component with the specified torques. • ...

Purge Control Solenoid Valve (PCSV) Specification

Item Specification Coil Resistance (Ω) 22.0 ~ 26.0 [20°C(68°F)] ...

See also:

Blower Resistor Replacement
1. Disconnect the negative (-) battery terminal. 2. Disconnect the blower resistor connector (A) and then remove the blower resistor (B) af ...

Power Seat Control Switch Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the seat side cover (A). 3. Disconnect the p ...

Rear Glass Defogger Printed Heater Inspection
   Wrap tin foil around the end of the voltmeter test lead to prevent damaging the heater line. Apply finger pressure on th ...