Kia Forte: Purge Control Solenoid Valve (PCSV) Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Engine Control System / Purge Control Solenoid Valve (PCSV) Removal
| 1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
| 2. |
Disconnect the purge control solenoid valve connector (A).
|
| 3. |
Disconnect the vapor hoses (B) from the purge control solenoid
valve.
|
| 4. |
Remove the valve (C) from the surge tank after pulling it.
|
Purge Control Solenoid Valve (PCSV) Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the PCSV connector.
3.
Measure resistance between the PCSV termi ...
Purge Control Solenoid Valve (PCSV) Installation
•
Install the component with the specified torques.
•
...
See also:
AGM Battery Installation
1.
Install in the reverse order of removal.
When installing the battery, ...
Passenger Airbag (PAB) Module
The passenger airbag (PAB) is installed inside the crash pad and protects
the front passenger in the event of a frontal crash. The SRSCM determines if
and when to deploy the PAB.
...
Description
System Overview
The System offers the following features:
-
Human machine interface through a 1-stage button, for terminal
switching and engine start.
...
Copyright © www.kifomanual.com 2014-2024