Kia Forte: Variable Intake Solenoid (VIS) Valve Description
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Engine Control System / Variable Intake Solenoid (VIS) Valve Description
Variable Intake manifold Solenoid (VIS) valve is installed on the intake
manifold. The VIS valve controls the vacuum modulator which activates a valve
in the intake manifold. The ECM opens or closes this valve according to engine
condition (Refer to below table).
| Engine condition |
VIS valve |
Operation |
| Medium speed |
Closed |
Increasing engine performance in low engine speed by reducing
intake interference among cylinders |
| Low / High speed |
Open |
Minimizing intake resistance by shortening intake manifold length
and increasing area of air entrance |
CVVT Oil Control Valve (OCV) Installation
•
Install the component with the specified torques.
•
...
Variable Intake Solenoid (VIS) Valve Specification
Item
Specification
Coil resistance (Ω)
30.0 ~ 35.0 [20°C(68°F)]
...
See also:
Description
The Vehicle Information System is a Telematics service that ensures comfortable
and enjoyable driving by providing safety, security, and vehicle diagnostic
information, with the option of usi ...
Instrument Cluster Control
Adjusting Instrument Cluster Illumination
The instrument panel illumination intensity can be adjusted by pressing the control
switch with the headlight switch in any position when the ignition s ...
Front Seat Belt Buckle Replacement
1.
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
2.
Disconnect the front seat belt buckle conn ...
Copyright © www.kifomanual.com 2014-2024