Kia Forte: Variable Charge Motion Actuator (VCMA) Inspection
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Engine Control System / Variable Charge Motion Actuator (VCMA) Inspection
| 1. |
Turn ignition switch OFF.
|
| 2. |
Disconnect the VCMA connector.
|
| 3. |
Check that the VCMA is not stuck by foreign material.
|
| 4. |
Measure resistance between motor (+) and (-) control terminals
of the motor.
|
| 5. |
Check that the resistance is within the specification.
|
| 6. |
Measure resistance between voltage supply terminal and ground
terminal of the position sensor.
|
| 7. |
Check that the resistance is within the specification.
|
Variable Charge Motion Actuator (VCMA) Circuit diagram
(M/T)
(A/T)
...
Variable Charge Motion Actuator (VCMA) Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the VCMA connector (A).
...
See also:
Electric Oil Pump Description
This transaxle has a standard Mechanical Oil Pump (MOP) linked to the
input shaft to generates oil pressure when input shaft rotates.
But, this transaxle equipped with ISG system also has ...
Timing Chain Cover Components
1. Timing chain cover
2. Service plug bolt & gasket
...
CVVT (Continuously Variable Valve Timing) System Operation Principle
The CVVT has the mechanism rotating the rotor vane with hydraulic force
generated by the engine oil supplied to the advance or retard chamber in accordance
with the CVVT oil control valve con ...
Copyright © www.kifomanual.com 2014-2024