Kia Forte: Variable Charge Motion Actuator (VCMA) Installation
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Engine Control System / Variable Charge Motion Actuator (VCMA) Installation
|
The VCM actuator has to be installed at the fully closing positon
of the VCM valve.
If it doesn't, the VCM coupling of the VCM shaft can't be put
in the the VCM actuator.
|
| 1. |
Install in the reverse order of removal.
|
Variable Charge Motion Actuator (VCMA) Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the VCMA connector (A).
...
See also:
Hands Free Switch Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver airbag module.
(Refer to Restraint - "Driver Airbag (DAB) Mod ...
Replacement
•
Put on gloves to protect your hands.
&n ...
Tail Gate Weatherstrip Replacement
(5Door)
1.
Remove the tail gate weatherstrip (A).
...
Copyright © www.kifomanual.com 2014-2024