1. |
Disconnect the battery terminals (A).
|
2. |
Remove the air duct and air cleaner assembly. (Refer to Engine
Mechanical System - "Air Cleaner")
|
3. |
Remove the battery insulation pad.
|
4. |
Remove the battery (A) after removing the mounting bracket.
|
5. |
Remove the ECM.
(Refer to Engine Control/Fuel System - “Engine Control Module
(ECM)”)
|
6. |
Remove the battery tray (A) after removing the bolts.
|
Vehicle load limit
Tire and loading information label
The label located on the driver's door sill gives the original tire size, cold
tire pressures recommended for your vehicle, the number of people that c ...
Start/Stop Button Removal
1.
Disconnect the negative (-) battery terminal.
2.
Using a screwdriver or remover, remove the center garnish [LH]
(A).
...
Accelerator Position Sensor (APS) Specification
Accelerator
Position
Output Voltage (V)
APS1
APS2
C.T
0.7 ~ 0.8
0.29 ~ 0.46
W.O.T
3.85 ~ 4.35
1.93 ~ 2.18
...