Kia Forte: DC/DC Converter Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / ISG (Idle Stop & Go) System / DC/DC Converter Removal
| 1. |
Disconnect the battery negative (-) cable.
|
| 2. |
Remove the crash pad lower panel.
(Refer to Body - Crash pad lower panel.)
|
| 3. |
Disconnect the DC/DC converter connector (A).
|
| 4. |
Remove the DC/DC converter (A).
|
DC/DC Converter Circuit Diagram
In the ISG mode, if the power of an audio system turnsOFF by drawdown
while “Auto Starting” or “Idle Starting”functi ...
DC/DC Converter Installation
1.
Install in the reverse order of removal.
If the battery negative (-) c ...
See also:
Special Service Tools
Tool (Number and name)
Illustration
Use
09880-4F000
Hog ring clip installer
Hog ring clip installation
...
AGM Battery Cleaning
1.
Make sure the ignition switch and all accessories are in the OFF
position.
2.
Disconnect the battery cables (negative first).
...
License Lamp Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the lens (A) after loosening the mounting screws.
3.
...
Copyright © www.kifomanual.com 2014-2024