Kia Forte: Brake Switch Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / ISG (Idle Stop & Go) System / Brake Switch Removal
| 1. |
Turn ignition switch OFF.
|
| 2. |
Remove the crash pad lower panel. (Refer to the Body group-"crash
pad")
|
| 3. |
Disconnect the stop lamp switch connector (A).
|
Brake Switch Inspection
1.
Connect a circuit tester to the connector of stop lamp switch,
and check whether or not there is continuity when the plunger of the
stop lamp switch is pushed in an ...
Brake Switch Installation
1.
Install in reverse of removal.
...
See also:
Troubleshooting
Problem Symptoms Table
Use the table below to help you find the cause of the problem. The numbers
indicate the priority of the like cause of the problem. Check each part in order.
...
Instrument cluster
1. Tachometer
2. Speedometer
3. Engine coolant temperature gauge
4. Fuel gauge
5. Turn signal indicators
6.Warning and indicator lights
7. LCD display ...
Fuel Tank Installation
1.
Install in the reverse order of removal.
Fuel tank band installation
nut:
39.2 ~ 54.0 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
...
Copyright © www.kifomanual.com 2014-2024