Kia Forte: Release Residual Pressure in Fuel Line
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Release Residual Pressure in Fuel Line
There may be some residual pressure even after “Release Residual
Pressure in Fuel Line” work, so cover the hose connection with a shop
towel to prevent residual fuel from spilling out before disconnecting
any fuel connection.
|
| 1. |
Turn the ignition switch OFF and disconnect the battery (-) cable.
|
| 2. |
Remove the fuel pump fuse (A).
|
| 3. |
Connect the battery (-) cable.
|
| 4. |
Start the engine and let idle, and then turn the ignition switch
OFF after the engine has stopped on its own.
|
| 5. |
Disconnect the battery (-) cable, and then install the fuel pump
fuse.
|
| 6. |
Connect the battery (-) cable.
|
| 7. |
Delete the Diagnostic Trouble Code (DTC) related the fuel pump
fuse with the GDS.
|
Fuel Pressure Test
1.
Release the residual pressure in fuel line (Refer to the Fuel
Delivery System - Repair Procedures - "Release Residual Pressure in
Fuel Line").
...
Fuel Tank Removal
1.
Release the residual pressure in fuel line (Refer to the Fuel
Delivery System - Repair Procedures - "Release Residual Pressure in
Fuel Line").
...
See also:
Seat Belt Switch Inspection
1.
Remove the connector from the switch.
2.
Check for continuity between terminals.
Seat belt condition
Continu ...
Components Location
1. Battery sensor
2. Brake Booster Vacuum Pressure Sensor (BBVPS)
3. AGM battery
4. DC/ DC Converter
5. ISG OFF Switch
6. Alternator
7. Starter
8. Brake switch
...
License Lamp Installation
1.
Connect the connector.
2.
Install the license lamp.
...
Copyright © www.kifomanual.com 2014-2024