Kia Forte: Fuel Pump Installation - Fuel Delivery System - Engine Control / Fuel System - Kia Forte TD 2014-2018 Service ManualKia Forte: Fuel Pump Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Fuel Pump Installation

1.
Install in the reverse order of removal.
  
Be careful of fuel pump direction when installing (Refer to the groove in the fuel tank).

Fuel pump plate cover installation bolt [LEV2]:
2.0 ~ 3.0 N.m (0.2 ~ 0.3 kgf.m, 1.4 ~ 2.2lb-ft)
Fuel Pump Plate Cover Installation [SULEV]:
78.5 ~ 98.1 N.m (8.0 ~ 10.0 kgf.m, 57.9 ~ 72.4lb-ft)

Fuel Pump Removal
[LEV2] 1. Release the residual pressure in fuel line (Refer to the Fuel Delivery System - Repair Procedures - "Release Residual Pressure in Fuel Line ...

Fuel Filter Removal
1. Remove the fuel pump (Refer to “Fuel Pump” in this group). 2. Disconnect the electric pump wiring connector (A) and the fuel sender conn ...

See also:

Relay Box (Passenger Compartment) Inspection
1. The SJB can be diagnosed by using the GDS. The SJB communicates with the GDS which then displays inputs and outputs along with codes. 2. ...

Rear Door Trim Replacement
(4Door, 5Door)    • Put on gloves to protect your hands. ...

Adjustment
Concentric Slave Cylinder Air Bleeding Procedure 1. After disconnecting a cap from the concentric slave cylinder air bleeder, insert a vinyl hose in the pl ...

Copyright © www.kifomanual.com 2014-2024