Kia Forte: Fuel Pump Motor Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Fuel Pump Motor Removal
| 1. |
Remove the fuel pump (Refer to “Fuel Pump” in this group).
|
| 2. |
Disconnect the electric pump wiring connector (A) and the fuel
sender connector (B).
|
| 3. |
Remove the head assembly (A) after releasing the cushion fixing
clip (B).
|
| 4. |
Disconnect the fuel tube quick-connectors (C).
|
| 5. |
Remove the fuel sender (A) in the direction of an arrow.
|
| 6. |
Disconnect the fuel tube connector (A).
|
| 7. |
Remove the cut valve (A) after releasing hooks (B).
|
| 8. |
Remove the reservior-cup (B) after releasing the fixing hooks
(A).
|
| 9. |
Release the fixing hooks, and then remove the pre-filter (A).
|
| 10. |
Remove the electric motor pump motor (B) from the fuel filter
(C) by pulling it in down direction.
|
Fuel Filter Installation
1.
Install in the reverse order of removal.
...
Fuel Pump Motor Installation
1.
Install in the reverse order of removal.
...
See also:
Phone
Before using the Bluetooth® Wireless Technology phone features
In order to use Bluetooth® Wireless Technology phone, you must first pair
and connect the Bluetooth® Wireless Technology mobile pho ...
Steering wheel
Electric power steering (EPS) Power steering uses the motor to assist you in
steering the vehicle. If the engine is off or if the power steering system becomes
inoperative, the vehicle may still be ...
Canister Removal
[LEV2 Type]
1.
Lift the vehicle.
2.
Disconnect the vapor hose quick-connector (A) and ventilation
hose (B).
...
Copyright © www.kifomanual.com 2014-2024