1. |
Turn the ignition switch OFF and disconnect the negative (-) battery
cable.
|
2. |
Disconnect the accelerator position sensor connector (A).
|
3. |
Remove the installation bolt (B), the nuts (C) and then remove
the accelerator pedal module.
|
SRSCM Connector Terminal
Pin
Function (Connector
A)
Pin
Function (Connector
B)
1
Ignition
1
Passenger side impact sensor (+)
2
-
...
Room Lamp Inspection
Room Lamp
1.
Check that the switch operates properly after disconnecting the
room lamp connector (A).
...
Main Crash Pad Assembly Replacement
•
Put on gloves to protect your hands.
&n ...