Kia Forte: Accelerator Pedal Installation

Accelerator Pedal Removal

1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor connector (A). ...

Delivery Pipe Removal

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Release the residual pressure in fuel line (Refer to the ...

See also:

A/C Pressure Transducer Description
The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by o ...

Removal
1. Engine cover. (Refer to Engine Mechanical System - "Engine cover") 2. Air cleaner assembly and air duct. (Refe ...

Fuel Filter Installation
1. Install in the reverse order of removal. ...