1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
2. |
Release the residual pressure in fuel line (Refer to the Fuel
Delivery System - Repair Procedures - "Release Residual Pressure in
Fuel Line").
|
3. |
Disconnect the injector connector (A).
|
4. |
Disconnect the fuel feed tube quick-connector (B).
|
5. |
Remove the installation bolt (C), and then remove the delivery
pipe & injector assembly from the engine.
|
Windshield Wiper-Washer Switch Inspection
Check for continuity between the terminals while operating the wiper and
washer switch. If it is not normal condition, replace wiper and wiper switch.
Wiper Switch
Washer Switch
...
Hood Assembly Replacement
•
Be careful not to damage the hood and body.
...
Components
...