Items |
Specified lubricants |
Quantity |
Clutch release cylinder assembly |
Brake fluid DOT 3 or DOT 4 |
As required |
Input shaft spline |
CASMOLY L9508 |
0.2 g |
Release bearing & Fork |
0.3 ~ 0.5 g |
|
Release Fork & Fulcrum |
0.5 ~ 1.0 g |
|
Release cylinder & Fork |
0.4 ~ 0.8 g |
|
Clutch release bearing and Clutch housing |
0.5~1.0 g |
Timing Chain Cover Installation
1.
Install the timing chain cover.
(1)
Using a gasket scraper, remove all the old packing material
from the gasket surfaces.
...
Relay Box (Engine Compartment) Inspection
Power Relay Test (Type A)
-
Do not use pliers.
-
...
Removal
1.
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
2.
Remove the front seat assembly.
...