Clutch cover and disc should be replaced as a set.
|
1. |
Apply grease on a disc spline part and transaxle input shaft spline
part as required.
|
2. |
Install the clutch disc and the cover by using the SST (09411-1P000).
|
3. |
Tighten the clutch cover bolts.
|
4. |
Install the transaxle assembly.
(Refer to Manual Transaxle System - "Manual Transaxle")
|
If you have a flat tire (If equipped)
Jack and tools
The spare tire, jack, jack handle and wheel lug nut wrench are stored in the
luggage compartment.
Remove the luggage under tray out of the way to reach the equipment.
(1) Jack h ...
Special Service Tools
Tool Name / Number
Illustration
Description
09411-1P000
Clutch disc guide
Used for holding clutch disc when installing
...
Rear Oil Seal Removal
1.
Remove the automatic transaxle.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
Remove the manual transaxle.
(Refer to Manual ...